Hired-hand Super Glo Brooders (Infrared): Anti-oxidant Kit User Manual download pdf

HIRED-HAND MFG., INC. • 1733 Co Rd 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 265-287-2000

Manual Part Number 4802-0410 Rev. 1-07 Page 1 of 2

Locking tab.

Three-wire connector on

potentiometer circuit.

Control Box

DESCRIPTION

Super-Glo Brooders with factory installed thermostat option depend upon a very low current signal on the potentiometer

(temperature switch) circuit. This signal may be interrupted by corrosion on the connectors in the circuit. This kit includes an

anti-oxidant compound which may be applied to the temperature switch connectors to inhibit corrosion.

TOOLS REQUIRED

PART NUMBERS

INSTRUCTIONS

1. Turn off or disconnect all

electrical power and gas

supplies to the brooder.

2. Remove the control box cover. See

Figure 1. Locate the potentiometer

(temperature switch) three-wire

connector on the HSI control module.

See Figure 2. Pull back on the locking

tab at the connector that connects the

potentiometer to the control module.

Disconnect the three-wire connector

from the module and then reconnect it.

Repeat the disconnect and reconnect

process two or three times, this will

help remove previous build up of

corrosion from the connection.

3. Cut a small opening on the end of the

anti-oxidant tube and squeeze a small

amount of the sealant onto the pin

connections on the control module and

inside the three-wire connector on the

potentiometer. Use care not to bend

the connectors.

4. Reconnect the three-wire connector to

the control module and replace the

control box cover.

5. Use a level to verify that the brooder canopy

is hanging level.

6. Turn on or reconnect electrical power and

gas supply to the brooder.

1/4" Hex Nut Driver Level

Figure 2 – HSI Module with Thermostat Option

ANTI-OXIDANT KIT 6450-0085

Part Qty. Description

0506-4000 1 Anti-oxidant sealant

Figure 1 – HSI Brooder

SUPE

-GLO BROODER ANTI-OXIDANT KIT

upe

lo HSI Broode

1 2

Figure 1 – HSI Brooder 1

Summary of Contents

Page 1 - Figure 1 – HSI Brooder

HIRED-HAND MFG., INC. • 1733 Co Rd 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 265-287-2000 Manual Part Number 4802-0410 Rev. 1-07 Page 1 o

Page 2

SUPER-GLO BROODER ANTI-OXIDANT KITSuper-Glo HSI Brooder

Comments to this Manuals

No comments

Hired-hand Super Glo Brooders (Infrared): Anti-oxidant Kit User Manual

Browse online or download User Manual for Radiators Hired-hand Super Glo Brooders (Infrared): Anti-oxidant Kit. Hired-Hand Super Glo Brooders (Infrared): Anti-oxidant Kit User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Radiators Hired-hand Super Glo Brooders (Infrared): Anti-oxidant Kit